Davo’s Fencing Clips

Quicker, easier and stronger

EnduraPost are proud to stock Davo’s Fencing Clips. Build your fences quicker, easier, stronger, and longer lasting with Davo’s Fencing Clips. Proudly designed and manufactured in rural Victoria, using Australian made wire. Can be used to better secure any kind of fence to timber, steel and plastic posts including EnduraPost Square Pickets and Droppers.

Now with the upgraded M8 Galvanized Coach Screw to suit the EnduraPost Square Pickets & Droppers.

What We Offer

EnduraPost Square Picket Features

Durable

EnduraPost Square Picket's unique mineral composite blend is the secret to why it is so tough. It is particularly suited to harsh environments where water-logged, acidic, alkaline or saline soils cause traditional posts to rot, rust and corrode. EnduraPost will not rot, rust or corrode, nor be eaten by termites and is UV-Stabilized to last in the harsh Australian climate.

Fully Insulated

EnduraPost Square Picket is a fully insulated post meaning it can be electrified with as many wires as needed without the added expense of installing insulators to posts. Use EnduraPost Square Pickets to quickly build a more cost-effective electric fence.

Fire

Do you want to know just how tough EnduraPost products are? A timber post can ignite in a fire from around 150°C but EnduraPost will typically need to reach around 350°C before it will ignite. It does not burn easily or explode, and is able to withstand ember attack, back-burning and grass fires where fuel loads are controlled. See fire statement for futher details.

Gallery

Fencing Clips In The Wild

Explore

Benefits of EnduraPost Square Pickets

Information

Technical Specifications

Information

Easy Installation

EnduraPost Square Picket can be easily installed using manual or mechanical drivers and can be sawn, drilled and screwed. In hard or rocky ground, simply make a pilot hole with a 30-40mm x 450mm masonry drill bit or ground auger to clear rocks or roots before installing. Designed as an inline post (not suitable as a weight-bearing post or strainer), EnduraPost can support all forms of wire, including plain, barbed, hinge-joint and barrier-mesh fencing. It is also great for creating mesh tree-guards around newly planted trees. Download our installation guide from downloads page.

FAQ

Frequently Asked Questions

EnduraPost Square Pickets and Droppers are solid recycled PP (polypropylene)plastic.

Whilst it is possible to break them it is not easy to do so.  This is because they are made from recycled woven polypropylene which is extremely tough.  They are extruded and pressurized into a mold which further increases their strength and durability. They are made to be handled in the same way as wooden or steel pickets are.  If they are breaking easily, please contact EnduraPost.

They have been tested to withstand fire up to 350⁰C which is usually hotter than a grass fire that normally reaches between 200-250⁰C.  Some larger bush fires can burn hotter particularly if the fuel load is wood.  Keeping wood away from fence lines should provide adequate protections, meaning that if a fire happens to pass through it is likely going to be a grass only fire.  They are also NOT susceptible to ember attacks unlike wood. 

They have been treated with a UV treatment to last 50+ years

Although they are made of plastic, they are not going to bend over in the hot sun.  Plastic can change shape when there are temperature differences from one side to the other.  If pickets are laid down on the ground in direct sunlight, they may start to warp or bend but that is because the polymers move due to temperature variations from one side to the other.  If this occurs, you can turn them over and they will straighten once again.  This does not impact the strength or durability of the picket, and once they have been driven into place the temperature variations are not severe enough for them to warp or bend.

Although the photos show plain wire run through the holes, many prefer to use the holes to tie back to instead.  Both methods work well for plain wire, whereas, for barbed wire or hinge-joint / ring-lock simply tie back to the appropriate holes provided.

Yes, they are tough and can be driven using mechanical or motorized drivers, or, by hydraulic drivers.

As they are made from plastic, we only recommend they are used as an in-line picket.  They are not suitable as a weight bearing post like a strainer or in-line stiff post.  It’s recommended that EnduraPost Square Pickets be combined with Concrete End Strainers or similar.  Then we recommend that a concrete line post or similar is installed as support after every 4 to 6 EnduraPost Square Pickets in a straight line, or, when the fence should make a turn.

They are slightly harder to drive in due to the surface area difference compared to steel pickets.

For stony or very hard ground we recommend helping them by predrilling a pilot hole using a 35mm x 450mm masonry drill before driving them in.

Due to their unique design allowing them to have some flex with strong memory bounce back, they do not typically loosen in the ground. For this reason they also do not need to be inserted into the ground as deeply, we recommend a min 300mm is sufficient for most applications in most soil types.

Contact Us

Get A Quote